RC4WD Bully Comp 2.2 Front & Rear Axle Z-A0020

Artikelnummer: RC4ZA0020

Kategorie: Achsen

Bully Comp 2.2 Front & Rear Axle

127,99 €

inkl. 19% USt., zzgl. Versand

Alter Preis: 139,50 €
UVP des Herstellers: 157,50 €
(Sie sparen 18.74 %, also 29,51 €)
momentan nicht auf Lager


Downloads

Name Beschreibung Dateiformat Vorschau

Beschreibung

Bully 2 Comp 2.2 Axle with Knuckles (Front) and Straight Axle Tube (Rear)
MOA Achse

The best MOA (Motor On Axle) on the market just got a lot better, stronger alloy and 60% heavier! Bully axle is created based on crawlers feedback! 40:1 gear ratio, 6mm wide steel gears, motor close to the axle tubes, 8mm XVD (Xtreme Velocity Drive) v4, Flat top on axle tube, thick steering arms, round knuckles for extreme steering angle, rear straight axle, round C for absorbing impact, clocked gear case.


Specifications:

  • Zinc alloy housing
  • Hardened steel gears
  • Full ball bearings
  • Powder coated in gun metal black
  • Width: 193mm/7.60inch (Hex to Hex)
  • Gear Ratio: 38.42:1
  • Designed to meet the 266mm comp rig width standard
  • Weight: 1.18kg/2.6lbs (front and rear)
  • Engineered & Manufactured by RC4WD
  • Hex to Hex Width:192 mm / 7.55"
  • Pin to Pin Width: 181mm /7.12"
  • Pumpkin Height: 75mm / 2.95"
  • Leaf Mount Width (Front): 93.8mm /3.69"
  • Leaf Mount Width (Rear): 139mm /5.47"
  • Weight (Front):  632g /22.3oz
  • Weight (Rear):  573g /20.2oz






Bully axle is manufactured with state of the art equipment and created based on a special mixture of zinc alloy.



Bully axle in action:







What's included:

  • 1x Bully 2.2 Front Axle with knuckles
  • 1x Bully 2.2 Rear Straight Axle
  • 2x Upper 4 links mount
  • 4x Lower 4 links mount
  • 2x Motor pinion gears
  • 2x Clear dusk cover



Notes: 

  • The gears don't come pre-lubed. You will need to remove the front cover and use your preferred lubrication or part # Z-S0520 (Monster Lube)
  • This axle is designed to fit any type of wheels that has a 12mm back hex.
  • Uses M2 x 6mm (Z-S0994) and M2 x 5mm (Z-S0738) for Clear cover
  • To get more width, you can use 12mm widener (Z-S0449)


Optional Parts:

  • Steering kit with servo mounts (Part # Z-S0560)


Replacement Parts:

  • Bully straight Axle Shaft (Part # Z-S0019)
  • Bully replacement gears (3) (Part # Z-S0077)
  • Bully bearings (Part # Z-S0524)
  • Bully axle housing parts (Part # Z-S0577)
  • Bully pinion gear (Part # Z-G0036)
  • Bully screws (Part # Z-S0470)

Benachrichtigen, wenn verfügbar

Produkt Tags

Kunden kauften dazu folgende Produkte